Fix Soil Condition Challenges with the Helical Piers

 


The foundation pins popularly called the Helical Piers contains the helices like the screws. It drives in the soil towards the below depth with the frost line for the hydraulic system. The piers are used for the supportive structures which enable the soil condition challenges to set up a traditional foundation system.

The Helical Piers are used for both residential and commercial space applications. They are used for mini piles, driven piles, and caissons. The structural damages help to take care of the damage that is mainly on unstable soil.

With the Helical Piers installation, the part is fixed in the basement waterproofing procedure. You can tell that foundation is damaged if you see certain listed points;

·         Cracking in the interior walls

·         Uneven flooring

·         Nails have popped out from the ceiling

·         Cracked basement

·         Leaning chimney

·         The gap in doors and window frames

 

The professional Helical Pier Contractors of New England from Solid Earth Technologies, Inc are the best Helical Piers near me for enjoying the skillful solution. The complicated project is economical in the solution if the experts here take the entire responsibility of it. Try it out with Solid Earth Technologies, Inc for the pioneering solution.

Location: Amherst, NH 03031, USA

Comments

Post a Comment

Popular posts from this blog

Importance of Underpinning for a Solid Foundation

Image
  Underpinning is a reinforcing of an existing foundation for a building. It is making the foundation stronger to support the house in any circumstances. The result of a change to the soil structure often influences the building and makes it lose. Foundation underpinning is a crucial point to look into if you are observing the following points. ·          The requirement of a solid supporting foundation that changes over time. Like the subsidence, expansion, contraction due to the moisture, large trees near to the house, and damaged plumbing are the reasons for it. ·          If the soil properties are not adequately understood while making the original framing, this may later turn out to be dangerous. ·          If the structure has been changed due to the renovation, then underpinning is required. ·          The new construction at the nearby location may cause interference damage those results in excavating the soil in the foundations. In the making of the New Bridge foun
Read more

Our Commitment to Our Customers

Image
  Helical pile foundation systems are one of the best and cheapest alternatives to steel and wood drove piles or concrete caissons. For you, this technique might be new, but for our team, this is now regular basis work as they know about this process very well. Apart from experience, we have also earned the professional certification which is required to install Helical Pier and effectually and can install them to your greatest advantage. Before starting the work, we do the entire testing such soil test or knowing the depth, and according to the soil conditions and content, we go for the helical blades which need to be required to carry out the work. Additional if required you can Ask for Pier and Beam Foundations that are added so that section can achieve the desired pile depth and torque rating. We take pride in our work and always focused on providing the best quality to our customers. Our objective is to have customer satisfaction, and we always work in that direction and get
Read more

The Installations Of The Helical Wall Anchors- Thoroughly Demystified

Image
  A helical pile/anchor is an extensible deep support system with the helical bearing plate welded to the central steel shaft. For  Installing Helical Wall Anchors  are utilized in the tension application, and the pile is utilized in compression application. Load is given from a shaft to soil through the bearing plates. The central steel shaft is available in either the Type SS series or the Type RS series. The SS Type series is available in 1-1/4 inch to 2-1/4 inch square sizes. The RS Type series are accessible and available in 2-7/8 inch to 4-1/2 inch diameter sizes.   The type SS-RS combos are even available for compression application in soil situations where hard/dense soils should be inserted with loose/softer soils above a bearing stratum. A Helical Pulldown series of Micropile is even utilized in an application similar to those needing the usage of the SS-RS Type combos.   The Installation Of Helical Wall Anchors   Segment or section is joined with the bolted coupl
Read more